|
Post by chris t on Feb 19, 2016 20:26:46 GMT 10
Hi, I would just like to know what is the best way to get more pressure to come out of the spray bars. I have a 3.5 Briggs and Stratton, with inch and a half hose, and the same size p v c pipe. I feel I need more spray to help clean in the hopper. Any advice would help.
|
|
|
Post by phillip on Feb 21, 2016 12:04:30 GMT 10
gday mate drop to a inch poly black drill two rows on each side 2 mm two rows 10 mm apart then mark verticle every inch start on top row left hand side bottom row right hand side fine white marker that way the spray bars dont clash there staggard hope this helps
|
|
|
Post by Rowdy on Feb 21, 2016 18:05:04 GMT 10
As Phillip said reduce the size or the number of holes in the spray bar. Just think of it as a bit like holding your finger on the end of the garden hose to increase pressure. Rowdy
|
|
|
Post by chris t on Feb 21, 2016 19:41:03 GMT 10
Thanks guys I'll do that set up
|
|
|
Post by phillip on Feb 26, 2016 16:07:54 GMT 10
also chris go to bunnings and grab a concrete hole brush like when your dynabolting there cheap and clean 1 inch poly pipes great
|
|